LPS LABORATORIES INC -- LPS TAPMATIC NATURAL CUTTING FLUID  -- -
<pre>=====================  Product Identification  =====================

Product ID:LPS TAPMATIC NATURAL CUTTING FLUID
MSDS Date:07/12/1995
FSC:NIIN:Submitter:F BT
Status Code:A
=== Responsible Party ===
Company Name:LPS LABORATORIES INC
Address:4647 HUGH HOWELL ROAD
City:TUCKER
State:GA
ZIP:30084-5096
Country:US
Emergency Phone Num:770-934-7800
Preparer's Name:JOHN ROUDEBUSH
Chemtrec Ind/Phone:(800)424-9300
CAGE:66724
=== Contractor Identification ===
Company Name:LPS LABORATORIES,	INC.
Address:4647 HUGH HOWELL ROAD
Box:City:TUCKER
State:GA
ZIP:30085-5052
Country:US
Phone:404-934-7800
CAGE:66724

=============  Composition/Information on Ingredients  =============

Ingred Name:FATTY ESTERS

Ingred Name:FATTY OILS

Ingred Name:FATTY ACIDS

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:ORAL LD50(RAT): > 5 G/KG
Routes of Entry: Inhalation:NO	Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:SKIN: IRRITATION.
Effects of Overexposure:IRRITATION

=======================  First Aid Measures  =======================

First Aid:INHALATION: MOVE TO FRESH AIR & PROVIDE OXYGEN IF BREATHING
    IS DIFFICULT. EYES: FLUSH W/PLENTY OF WATER. SKIN: WASH W/SOAP &
    WATER. INGESTION: GIVE TWO GLASSES OF WATER. NEVER GIVE ANYTHING BY
    MOUTH T O AN UNCONSCIOUS PERSON. DON'T INDUCE VOMITING. OBTAIN
    MEDICAL ATTENTION IN ALL CASES.

=====================  Fire Fighting Measures  =====================

Flash Point Method:COC
Flash Point:=176.7C, 350.F
Lower Limits:N/E
Upper Limits:N/E
Extinguishing Media:DRY CHEMICAL, FOAM, CO2
Fire Fighting Procedures:WATER MAY BE INEFFECTIVE, BUT MAY BE USED TO
    KEEP FIRE EXPOSED CONTAINERS COOL.
Unusual Fire/Explosion Hazard:SCBA SHOULD BE USED BY FIRE FIGHTERS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE LEAKING CONTAINER & CONTAIN SPILL.
    SOAK/MOP UP W/ABSORBENT MATERIAL & DISCARD.

======================	Handling and Storage  ======================

Handling and Storage Precautions:PRODUCT SHOULD BE STORED ABOVE 20F &
    BELOW 120F. KEEP CONTAINERS CLOSED WHEN NOT IN USE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE REQUIRED IF GOOD VENTILATION IS MAINTAINED
Ventilation:MECHANICAL GENERAL IS USUALLY ADEQUATE
Protective Gloves:AS NEEDED TO PREVENT PROLONGED/REPEATED CONTACT.
Eye Protection:SAFETY GOGGLES
Work Hygienic Practices:WASH HANDS W/SOAP & WATER AFTER USE/BEFORE
    BREAKS, LUNCH & AT THE END OF WORK PERIODS. REMOVE/LAUNDER
    CONTAMINATED CLOTHING/SHOES BEFORE REUSE.
Supplemental Safety and Health
PART NUMBERS 44204, 44220, 44230, 44240, 44260

==================  Physical/Chemical Properties  ==================

Spec Gravity:0.888
Evaporation Rate &amp; Reference:(WATER=1): 0
Solubility in Water:SLIGHT
Appearance and Odor:CLEAR, GREEN LIQUID W/FATTY ODOR
Percent Volatiles by Volume:0

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:CO, CO2

====================  Disposal Considerations  ====================

Waste Disposal Methods:AVOID LANDFILLING OF LIQUIDS. RECLAIM WHERE
    POSSIBLE. DISPOSE OF IAW/LOCAL, STATE & FEDERAL REGULATIONS.

=======================  Other Information  =======================

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.