GENERAL PAINT & CHEMICAL CO. -- DEEP BASE -- 8010-00F009169
=====================  Product Identification  =====================

Product ID:DEEP BASE
MSDS Date:01/24/1985
FSC:8010
NIIN:00F009169
=== Responsible Party ===
Company Name:GENERAL PAINT & CHEMICAL CO.
Address:201 JANDUS ROAD
City:CARY
State:IL
ZIP:60013
Info Phone Num:(312) 639-5383
Emergency Phone Num:(312) 639-5383
CAGE:GENEA
=== Contractor Identification ===
Company Name:GENERAL PAINT & CHEMICAL
Address:201 JANDUS ROAD
City:CARY
State:IL
ZIP:60013
Phone:(312) 639-5383
CAGE:GENEA

=============  Composition/Information on Ingredients  =============

Ingred Name:MEDIUM ALIPHATIC NAPHTHA (AROMATIC 100)
CAS:64742-88-7
Fraction by Wt: 30-45%
Other REC Limits:100 PPM
OSHA PEL:500 PPM
ACGIH TLV:100 PPM

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYE: SEVERE IRRITATION. SKIN: DRYING.
    INHALATION: HEADACHE, DIZZINESS & NAUSEA.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYE: SEVERE IRRITATION. SKIN: DRYING.
    INHALATION: HEADACHE, DIZZINESS & NAUSEA.

=======================  First Aid Measures  =======================

First Aid:EYES/SKIN: WASH W/FRESH WARM WATER & SOAP. INHALATION: REMOVE
    TO FRESH AIR. APPLY ARTIFICIAL RESPIRATION IF NECESSARY. GET
    MEDICAL ATTENTION. INGESTION: DON'T INDUCE VOMITING. KEEP PERSON
    WARM & QUIET . GET MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point:105F
Lower Limits:0.9%
Extinguishing Media:FOAM, CO2, DRY CHEMICAL, WATER FOG
Fire Fighting Procedures:TREAT AS A VOLATILE LIQUID FIRE. WATER SPRAY
    MAY BE INEFFECTIVE. IF WATER SPRAY IS USED, FOG NOZZLES ARE
    PREFERABLE.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
    EXPOSED TO EXTREME HEAT. ISOLATE FROM HEAT, SPARKS & OPEN FLAME.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES. CONTAIN SPILL,
    ABSORB LIQUID W/CLAY, SAND & FLOOR ABSORBENT. PREVENT RUN-OFF TO
    SEWERS, STREAMS/OTHER BODIES OF WATER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS & OPEN
    FLAME. DON'T TAKE INTERNALLY. AVOID PROLONGED CONTACT W/SKIN.
Other Precautions:CONTAINERS SHOULD BE GROUNDED WHEN POURING. AVOID
    FREE FALL OF MORE THAN 2-3 INCHES WHEN POURING.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA JOINTLY APPROVED AIR SUPPLIED
    RESPIRATOR IF TLV ARE EXCEEDED APPROVED MECHANICAL FILTER TO REMOVE
    SOLID AIRBORNE PARTICLES OF OVERSPRAY DURING SPRAY APPLICATION.
Ventilation:PROVIDE SUFFICIENT MECHANICAL/LOCAL EXHAUST VENTILATION TO
    KEEP AIR
Evaporation Rate & Reference:SLOWER THAN ETHER

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
CONTACT W/STRONG OXIDIZING AGENTS
Stability Condition to Avoid:ISOLATE FROM HEAT, OPEN FIRE & SPARKS
Hazardous Decomposition Products:CO, POSSIBLE ACROLEIN & OXIDES OF
    NITROGEN

====================  Disposal Considerations  ====================

Waste Disposal Methods:CONTAMINATED ABSORBENT MAY BE DEPOSITED IN
    LANDFILL IN ACCORDANCE W/LOCAL, STATE & FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.