BLH ELECTRONICS -- METHYL ETHYL KETONE -- 6810-00N062002
===================== Product Identification ===================== Product ID:METHYL ETHYL KETONE MSDS Date:03/15/1995 FSC:6810 NIIN:00N062002 === Responsible Party === Company Name:BLH ELECTRONICS Address:75 SHAWMUT RD City:CANTON State:MA ZIP:02021-1408 Country:US Info Phone Num:617-821-2000 Emergency Phone Num:617-821-2000;800-424-9300(CHEMTREC) CAGE:03089 === Contractor Identification === Company Name:BLH ELECTRONICS INC Address:75 SHAWMUT RD Box:City:CANTON State:MA ZIP:02021-9111 Country:US Phone:617-821-2000 CAGE:03089 ============= Composition/Information on Ingredients ============= Ingred Name:2-BUTANONE;(METHYL ETHYL KETONE) (MEK) (SARA 313) (CERCLA) CAS:78-93-3 RTECS #:EL6475000 Fraction by Wt: 100% OSHA PEL:200 PPM ACGIH TLV:200 PPM;300 STEL EPA Rpt Qty:5000 LBS DOT Rpt Qty:5000 LBS ===================== Fire Fighting Measures ===================== Flash Point Method:TCC Flash Point:21.0F,-6.1C Lower Limits:1.8% Upper Limits:11% Extinguishing Media:DRY CHEMICAL, FOAM, CARBON DIOXIDE OR ALCOHOL FOAM. Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE EQUIPMENT. KEEP AWAY FROM HEAT, SPARKS & OPEN FLAME. Unusual Fire/Explosion Hazard:VAPOR IS FLAMMABLE & HEAVIER THAN AIR & MAY TRAVEL TO SOURCE OF IGNITION AND FLASHBACK. ============= Exposure Controls/Personal Protection ============= Supplemental Safety and Health ================== Physical/Chemical Properties ================== Boiling Pt:B.P. Text:176F,80C Melt/Freeze Pt:M.P/F.P Text:-123F,-86C Vapor Pres:100 @ 25C Vapor Density:2.5 Spec Gravity:0.805(H*2O=1) Evaporation Rate & Reference:2.7 (ETHER=1) Solubility in Water:29G IN 100G OF WATER Appearance and Odor:CLEAR COLORLESS LIQUID. ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES OXIDIZING MATLS, CHLOROFORM, CHLOROSULFONIC ACID, OLEUM, POTASSIUM-T-BUTOXIDE, HEAT/FLAME, HYDROGEN PEROXIDE, (SUPDAT) Stability Condition to Avoid:OPEN SPARKS & FLAMES. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.